Electrical Tools, Hand Tools, Wire Strippers, Electrical Tools & Test Equipment
Klein Tools 11063W Automatic Wire Cutter/Stripper (8-20 AWG)
Klein Tools
Description
A one-squeeze automatic wire stripper and cutter that handles solid and stranded wire without swapping tools — precision-machined stripping holes make clean strips a single motion.

Electrician stripping a wire with an automatic wire stripper tool at a workbench (concept image)
The images shown are AI-generated concept illustrations created to closely resemble this product, but may differ from the actual item. Please check Amazon for the exact product, current price, and full specifications.
Use Case Story
Wiring a panel or running a batch of outlets involves stripping the same gauge wire dozens of times in a row, and a manual stripper that requires precise blade depth adjustment turns into a bottleneck fast.
This tool skips that step entirely — clamp onto the wire and squeeze, and the compound action grips, strips, and releases in one motion. No re-gripping, no guessing the depth.
The precision-machined stripping holes are the part that actually matters for wire integrity. A stripper with worn or imprecise holes nicks the copper strands underneath the insulation, which weakens the wire and can cause a bad connection down the line. Clean holes mean clean strips, consistently, wire after wire.
What works well:
The single-squeeze action genuinely speeds up repetitive stripping work — a noticeable difference over a full day of panel or device wiring. The tension-loaded grip keeps the wire from sliding out mid-strip, even on shorter offcuts.
Where it has limits:
It's built for the 8-20 AWG solid / 10-22 AWG stranded range — anything outside that needs a different tool, like a smaller-gauge stripper for low-voltage or electronics work. It's also not insulated, so it's not rated for use on or near live circuits.
A caution worth repeating:
Like any non-insulated tool, this should only be used on de-energized wire. Confirm a circuit is dead with a voltage tester before stripping any wire connected to it.
For anyone assembling a first electrical toolkit: this is the kind of tool that gets picked up dozens of times a day once it's in the bag, which is part of why it holds such a high repeat-purchase rate among working electricians.
Key Features
- Compound-action design strips and cuts wire in a single squeeze
- Handles 8-20 AWG solid and 10-22 AWG stranded electrical wire
- Precision-machined stripping holes for clean, consistent strips
- Tension-loaded wire grip holds the cable in place without damaging its geometry
- Cast alloy construction with heavy-duty Ecoat finish for corrosion resistance

Close-up of an automatic wire stripper tool's jaws and stripping holes (concept image)
Key Specs
Spec | Detail |
Wire Range | 8-20 AWG solid, 10-22 AWG stranded |
Action | Compound (single-squeeze strip + cut) |
Construction | Cast alloy, Ecoat finish |
Insulated | No |
Country of Origin | Made in USA |
Price Range
$28 – $35
Pros
- Single-squeeze action saves time on repetitive stripping
- Precision-machined holes prevent nicked wire strands
- 4.8★ rating with very high repeat-purchase rate ("Customers usually keep this item")
- Made in USA, durable cast alloy build
Cons
- Not insulated — not rated for use near live circuits
- Limited to 8-20 AWG solid / 10-22 AWG stranded range
FAQ
Q. Can I use this on live wires?
A. No — this tool isn't insulated. Always confirm a circuit is de-energized with a voltage tester first.
Q. Does it work on Romex/NM cable?
A. It strips individual conductors within the range listed; for jacket removal on NM cable specifically, a dedicated NM cable stripper is more appropriate.
Q. Is it good for beginners?
A. Yes — the self-adjusting compound action removes most of the guesswork involved in manual stripping.
































